KZH with 1KZ-TE engine and service sensor items

what sensors are on this engine?

MAP sensor?
MAF sensor?
Oxygen sensor?

IAT
MAP
2 temperature sensors
Oil pressure
Oil level
Crankshaft position
TPS

No MAF or O2

There’s more but those are the main ones that keep the ECD happy.

Hope that helps
-Bryan

Hey do you have the part numbers for those sensors? I've replaced some of them already as part of maintenance but would like to make sure all are refreshed.

Never mind.  I figured them out.  For anyone else here are the part numbers.

SENSOR, DIESEL ENGINE WATER TEMPERATURE - Temp sensor 1 89422-35010
GAGE ASSY, WATER TEMPERATURE SENDER - Temp sensor 2 83420-16040
SWITCH ASSY, OIL PRESSURE (FOR ENGINE) 83530-60010
SENSOR, INLET AIR TEMPERATURE (FOR DIESEL TURBO) - IAT 89424-12010
SENSOR, TURBO PRESSURE (FOR DIESEL TURBO) - MAP 89421-60040
SENSOR, ENGINE OIL LEVEL 89491-60040
       GASKET, ENGINE OIL LEVEL SENSOR 90430-27001
SENSOR, THROTTLE POSITION - TPS 89452-22090
SENSOR, CRANK POSITION 90919-05005

Good Morning.

Something I found that is an option for US residents, the vast majority of these sensors are available in the aftermarket at RockAuto as they were used on other platforms. Stick the Toyota part number in the search.

Worth considering when you need them.

Just an option that’s all, appreciate all that research Brewera. That’s never fun.

-Bryan

blgravely wrote:

Good Morning.

Something I found that is an option for US residents, the vast majority of these sensors are available in the aftermarket at RockAuto as they were used on other platforms. Stick the Toyota part number in the search.

Worth considering when you need them.

Just an option that’s all, appreciate all that research Brewera. That’s never fun.

-Bryan

Agreed on the Rock Auto cross reference. I have no problem buying after market NTK or WVE equivalent sensors. The two temp sensors, oil pressure, IAT, and TPS can be found on Rock Auto.