motorwaydrifter New Member
Number of posts : 16 Registration date : 2009-02-03
| Subject: Head removal 2.4 SC Sun Dec 23, 2012 11:05 pm | |
| When removing the head on a 2.4 SC 1991 model year, is it easier to take the head off complete with exhaust manifold and turbo or is removal of manifold straightforward? Thanks for any info. | |
|
Guest Guest
| Subject: Re: Head removal 2.4 SC Sun Dec 23, 2012 11:59 pm | |
| Get a copy of the manual....... The Hiace Workshop Manual is below:
http://www.mediafire.com/download.php?ddq1fbbv38746mw
And here is the turbo 2LT / 2LTII / 3L engine manual on its own:
http://www.mediafire.com/view/?g5qkwnw5ky5f4k8
All the information you require is in those manuals.
|
|
motorwaydrifter New Member
Number of posts : 16 Registration date : 2009-02-03
| Subject: Re: Head removal 2.4 SC Mon Dec 24, 2012 9:00 am | |
| Many thanks Jeff. That's my Christmas break taken care of! | |
|
Clive Hiace Master
Number of posts : 1094 Home City : Bristol UK Model and year : 2003 Range Rover 4.4 goes like a rocket and drinks like Oliver Reed! Registration date : 2008-11-05
| Subject: Re: Head removal 2.4 SC Wed Jan 02, 2013 7:50 am | |
| I suspect by now you have found that the head is heavy and any thing that you can unbolt and remove from it helps. | |
|
motorwaydrifter New Member
Number of posts : 16 Registration date : 2009-02-03
| Subject: Re: Head removal 2.4 SC Wed Jan 02, 2013 8:01 am | |
| Hi Clive. Heavy. cracked and scrap!! It was easy to take manifold off from head once I got into it. New head ordered. | |
|
Clive Hiace Master
Number of posts : 1094 Home City : Bristol UK Model and year : 2003 Range Rover 4.4 goes like a rocket and drinks like Oliver Reed! Registration date : 2008-11-05
| Subject: Re: Head removal 2.4 SC Wed Jan 02, 2013 10:54 am | |
| I recommend genuine Toyota head gasket and new bolts. The bolts are the stretch type and can easily bottom out and appear to be the correct torque but not clamp the head that extra thou, beware! | |
|
motorwaydrifter New Member
Number of posts : 16 Registration date : 2009-02-03
| Subject: Re: Head removal 2.4 SC Wed Jan 02, 2013 12:39 pm | |
| Thanks Clive. I am using Payen bolts and gasket. I've used their products for many years on a variety of vehicles. There are a lot of cheapies on e bay but I don't intend to do this again! | |
|
Sponsored content
| Subject: Re: Head removal 2.4 SC | |
| |
|