Help, i cant find a Windscreen water container, 1993 Japan

Hey guys,

I'm a proud Hiace owner from Australia, i got a hiace from 1993 from Japan.

and unfortunality i cant find any water container...

if would be great if someone can help me

Thank you !

Gosh, what happened to that?

I put bigger tyres on ( 235 75 R15 ) so I have to prepare the wheel housing liner, and the windscreen water container  was at the left hand side front wheel. the plastic was sooo old that's brooked like crips bread    yeah now i need a new one

Lol just pop that Woolies bag back over it! Sadly they degrade quickly too . . .
You might just have to fit a generic wash bottle and organise to fill it through the engine bay. There were a few being wrecked in melbourne, I think the ads were on gumtree.

I had the Australian model before I got my Super Custom.....They fill the same way, and are located in the same place ........ At least mine were the same.
I don't know if they are a different shape though. Have you compared it to the aussie model?

50mm larger diameter tyres - which is gonna throw things out. Never would have thought the windscreen washer bottle would be one of them!

I'm not sure I'm understanding correctly but Just looking at mine, if anything was going to hit it would hit the wheel arch first but there is a ton of clearance before that happen. I'm running 205 70 R15 but I could up the profile and still not have an issue.
I hope you find something.....Good luck

Hello.

Here's the part for my van: https://toyota.epc-data.com/regius_ace/lh119v/114894/electric/8503/. Set your model / year in the site and take a look?  It's probably the same (of very similar) part number though.

HTH

hey guys, thank you so much for your comments, yeah it was more the fault from the tyre mechanic... but it was not such a fault, the paltic was so bad, good thats happen now befor I'm driving in the outback

yes i found it by toyota, exactly the part https://toyota.epc-data.com/regius_ace/lh119v/114894/electric/8503/ here.

thank you guys for your help !

Hi. I had the same problem. The container was so brittle that I ended up with a fist-sized hole in it. I used gorilla tape, soft muslin cloth and about 6 packs of 2-part epoxy resin to rebuild it. It seems to be holding up well.

hey gays. what is these items...which is mark with two red lines.