JohnHRef999
Been here a while
Number of posts : 150
Age : 72
Home City : Lincoln England
Model and year : 1993 Hiace Campervan 4WD 2779cc Diesel Auto Transmission. Sold now
2001 Granvia Camper 3.4ltr V6 Auto
Registration date : 2007-07-17
 | Subject: 2L and 3L Engine (2.4 & 2.8 ltr Diesel) Cylinder Head I  Sat Aug 25, 2007 7:30 am | |
| Cylinder Head Tightening sequence from left to right.(AND Removal sequence 90 degrees at a time!! May take several passes.) To tighten Start off at 30 Nm then 60 Nm then 70 Nm then finally torque at 78 Nm before painting dots on bolt heads - all at 360 degree position on bolt head. Then two passes at 90 degree per pass.This will prevent distortion of the head or block faces.
17B - 11A - 9B - 3A - 1B - 5A - 7B - 13A - 15B
16B - 14B - 8B - 6B - 2B - 4B - 10B - 12B -18B
78 N-m Paint Spot on bolt head + 90 degrees + 90 degrees
2 sizes of bolts 107mm (offside of engine 4 off.)
127mm (centre & middle row 14 off)
Need more info - contact me! | |
|
