LEXUS Wheels

Subject: LEXUS Wheels Sun Jul 12, 2009 11:44 am

Has any one tried Lexus wheels and been successful? Question

Subject: Re: LEXUS Wheels Sun Jul 12, 2009 12:18 pm

As with any other wheel just make sure they can carry the weight of a SC.

Subject: Re: LEXUS Wheels Sun Jul 12, 2009 4:44 pm

tried 18" of a soarer.the backs fit ok but the fronts caught on lock

Subject: Re: LEXUS Wheels Mon Jul 13, 2009 3:03 am

I belive WERX has SC430 wheels. I suspect that some machining may be involved. I tried the standard wheels off my R33 skyline and they didn't fit all the way. Had to smash them off coz they got stuck, did wonders for the balancing bounce

Subject: Re: LEXUS Wheels Mon Jul 13, 2009 4:11 am

Vozza, you are right. the offset is not perfect but they fit once you have had them machined to fit the larger hub. Finding a set is not that easy though.
rex

Subject: Re: LEXUS Wheels Mon Jul 13, 2009 5:22 am

How much you pay and where did you find them?

Subject: Re: LEXUS Wheels Mon Jul 13, 2009 5:31 am

Ebay, $350 the set. they do catch slightly on full lock however. then you have got the machining at Abarth up at Thornleigh.

Subject: Re: LEXUS Wheels Sat Jul 25, 2009 8:10 pm

If you fitting pre AU Falcon mags be aware that the Toyota studs may not be long enought. i have fitted longer high tensile studs available from Nice Products in Marrickville, Sydney. they seem to be the only place that has them.
Note also the lawa has changed about lowering your vehicle. $1,000 to get engineers approval - bugger.

» Lexus mags
» What wheels are these??
» wheels - before and after
» wheels
» WHEELS