frontslide
Not so new now
Number of posts : 23
Home City : Derbyshire
Registration date : 2012-07-27
 | Subject: Pinion seal  Mon Mar 27, 2017 6:25 pm | |
| Can the pinion seal be changed easily or is it an axle shop job? (1994 2.8 3L) | |
|
GPW
Hiace Master
Number of posts : 1527
Home City : Cambridge, UK
Model and year : Model: KD-KZH100G-MRPGT
Year: 1996
Colour: 4K1
Trim: FN42
Registration date : 2016-07-16
| | Subject: Re: Pinion seal Mon Mar 27, 2017 8:07 pm | |
| Under the passenger seat next to the engine there should be a plate with the engine, transmission and diff models on it.
I suspect yours is the same as the 4runner as lots of bits seem to be the same:
https://www.youtube.com/watch?v=fW6Yld-8KsY | |
|
Hiace4wd
Hiace Master
Number of posts : 796
Home City : Netherlands
Model and year : 1994 Toyota Hiace 4x4 DIY camper
Registration date : 2016-02-01
| | Subject: Re: Pinion seal Mon Mar 27, 2017 8:24 pm | |
| Yeah you can check out the youtube video, it is the same axle. Even if it wasn't, the idea would still be the same. | |
|
frontslide
Not so new now
Number of posts : 23
Home City : Derbyshire
Registration date : 2012-07-27
| | Subject: Re: Pinion seal Tue Mar 28, 2017 8:51 pm | |
| Need to find out the pre-load torque setting dont want to be guessing. | |
|
GPW
Hiace Master
Number of posts : 1527
Home City : Cambridge, UK
Model and year : Model: KD-KZH100G-MRPGT
Year: 1996
Colour: 4K1
Trim: FN42
Registration date : 2016-07-16
| | Subject: Re: Pinion seal Tue Mar 28, 2017 9:39 pm | |
| If the diff is currently free and not whining (i.e. adjusted properly) would it be possible to just do the nut up to the same position as it was to start with?
Also if there is a crush sleeve your options may be limited. | |
|
