TwentyOneThirtyFive Been here a while
Number of posts : 222 Home City : Hertfordshire, UK Model and year : Super GL Camper (Vantech), 2.8D 4wd, 1995 Registration date : 2016-08-04
| Subject: Re: Alternator adjustment Thu Feb 02, 2017 11:29 am | |
| If it ever stops raining, I'll try and get a picture...
There are 4 pulleys on the crankshaft. From inner to outer: fan/alternator, fan/alternator, AC, power steering.
AC pump is located above the alternator.
There is a tensioner pulley for the AC belt below the alternator.
There is an idler pulley for the AC belt at the top of the engine.
Hope that is of some help, I'll see about getting a picture. I do have a good diagram somewhere, too. | |
|
Hiace4wd Hiace Master
Number of posts : 796 Home City : Netherlands Model and year : 1994 Toyota Hiace 4x4 DIY camper Registration date : 2016-02-01
| Subject: Re: Alternator adjustment Thu Feb 02, 2017 2:09 pm | |
| Ok, that confirms what I was thinking. Would be interesting to know where it is bolt on the engine.
Thanks. | |
|
TwentyOneThirtyFive Been here a while
Number of posts : 222 Home City : Hertfordshire, UK Model and year : Super GL Camper (Vantech), 2.8D 4wd, 1995 Registration date : 2016-08-04
| Subject: Re: Alternator adjustment Thu Feb 02, 2017 2:42 pm | |
| Here we go.
Idler pulley bolts onto AC compressor bracket, which is attached to side of block.
http://japan-parts.eu/toyota/jp/1994/hiace-regiusace/lh119v-rrpes/4_711140_106_/electrical/8719_heating-air-conditioning-compressor/1#88545
not sure what the tensioner pulley bracket bolts onto, it's under the alternator and I did most of that by feel... | |
|
Hiace4wd Hiace Master
Number of posts : 796 Home City : Netherlands Model and year : 1994 Toyota Hiace 4x4 DIY camper Registration date : 2016-02-01
| Subject: Re: Alternator adjustment Fri Feb 03, 2017 8:25 am | |
| Thanks. I found this, I was just wondering where on the engine it will go. I guess I will have to find the bolt holes. | |
|
Sponsored content
| Subject: Re: Alternator adjustment | |
| |
|