front wheel alignment angles???

I have an appt to get a front wheel alignment on Friday but I need to provide the technician with the tolerance angles for the front end. Does anybody have these specs?

I have an old Hiace Chassis Manual that quotes
Caster 35'plus or minus30'
Camber 35'plus or minus30'
Axis Inclination 7degrees40minutes
Toe In 8mm plus or minus 1mm Unloaded 2mm Loaded

I would give your local Toyota dealer a ring to confirm this
Mine at Lincoln - Listers Group Toyota of Lincoln, have been very helpful in the past.

Thanks but I don;t think those #rs apply. I can;t get the dealer to confirm the #rs as the Hiace is not included in their North American data base.

I ended up having to cancel the appt for today.

I have a 1991 - LH107G body that is a 4x4.

If anybody can provide specs I would be very grateful.

I made a request for these and got zero back a while ago https://hiace-super-custom.forumotion.com/grease-monkey-sorry-couldnt-resist-its-a-bf2142-thing-f1/tracking-settings-t241.htm
you will probably have to look else where...

So that's what you meant by track setting.

I/we need to get our grubby little hands on a shop manual for Hiace's. I'd donate $ to this forum if I knew it was going towards the purchase a communal shop manual...

hello everyone I will gladly pay for a workshop manual for a 94 3.0 turbo Diesel constant 4x4 if one is available

regards Kimbo

zoochy wrote:

LH107G body that is a 4x4.  

If anybody can provide specs I would be very grateful.

Exactly what i need

Any chance these are available?

I'm not sure if this helps.. It was passed along from owner to owner with my Hiace. Though in the document listing applicable vehicles, the LH107 is missing..grr

Toyota Hiace 1989-2004 Factory Service Manual

Perhaps it'll help? Let me know if I need to change widen the sharing permissions.

webdings wrote:

I'm not sure if this helps.

Much appreciated!, I can use it for other repairs.
Seems my model is not listed whenever I search for many things...
Since the numbers are similar in 4wd, I used them and it seems to keep me straight on the road.

There's the manual here
https://hiace-super-custom.forumotion.com/t3214-manuals-for-toyota-hiace

If you can't find the measurement I know if it was me I'd be tempted to set it straight and keep an eye on tyre wear and driveability,

I'd have thought he'd be able to look it up though, not many people carry the front geometry for their cars around in their head..

I'm looking for those specs myself. 1991 super custom 4x4 here. Does this check out?

http://www.jltechno.com/en/alignment_specs.php?brand=TOYOTA&ModelName=HI-ACE&ModelID=617176

Or better yet, this one? http://www.jltechno.com/en/alignment_specs.php?brand=TOYOTA&ModelName=HI-ACE%C2%A0(RZH/LH)/4*4+SWB&ModelID=616910