Butane delivery for stove/fridge, LP Regulator for free

Good day,
As pictured (the fork is there for size reference)
I have convereted from the stock Butane system that ran the stove and fridge to a Propane system here in Victoria, British Columbia Canada. I am offering the removed carriage and regulator from my camper setup (as pictured).
From the carriage assy is a quick disconnect, the female end of the QD has a flared end for attachment to a rubber hose either 3/8" or 1/2" that would feed the appliance ( stove)
If you are interested in it, just cover the postage and its all yours, NOTE: i wont be able to mail the 2 orange bottles due to hazardous material regulations, just the carriage/regulator.

Does this require the compartment to be vented? Will it accept Coleman propane canisters?

Hi, This cariage is only suitable for Butane, The cabinet in the galley is ventilated and a 12 volt alarm is installed when Butane/Propane is detected

Sure, I'll take it. Where can I get replacement canisters?

I cant help you with Butane canisters, sorry
PM me and we can work out how to get the carriage to you

Can you share how you converted your stove to propane and pictures?

Hi, The Cartridge and butane bottles that were prev installed from japan, were connected to the stove and fridge thru a plastic QD fitting to a rubber hose that split to a Y and became 2 steel lines that fed the stove and fridge (you can see the plastic QD fitting in the pics i attached earlier for the Butane Cartridge). When I converted to propane I connected a new 15ft propane line (purchased from the BBQ section at Home depot) that is threaded at one end and a brass QD at the other.  I connected the threaded end to a new brass fitting that replaced the plastic QD that was originally there ( the single orange line that splits to 2 for stove and fridge). I then bought a new Low press propane regulator (for 20lb tanks) that had a 2 ft hose and screwed a female QD into that hose end to mate with the new 15ft propane line that had the mating QD fitting at one end. I chose QD fitings so that i could feed the fitting of the 15ft hose thru a floor hole in the van to the outside (where i would conect it to a 20lb propane tank). I also bought a fitting for 1lb propane cylinders to connect to the LP regulator instead of a 20lb tank if i just wanted to keep everything internal.

Awesome, thanks! I'm going to try that, so I'll pass on the carriage for now

hello,
just checking to see if this butane carriage is still available? I just bought a 91 Hiace Cruising Cabin and it's got stove but nothing but a hose end, I think this may be the one I need that I've seen in my research. Please feel free to PM me if so, thanks!

More pics