Number of posts : 31 Home City : Norwich, UK Model and year : Cruising Cabin 1993 2.8lt diesel, manual, 2 wd Registration date : 2010-05-11
Subject: Rock and roll bed in a Cruising Cabin Sat Jul 04, 2020 11:26 am
Has anyone fitted a rock and roll bed into a cruising cabin? Mine is a 1993 one with the sideboard in place. Current bad is too hard and bumpy but we want to keep the van, so considering taking out current seats to replace with single rear bench seat/bed. Anyone know of a supplier of these?
Southee New Member
Number of posts : 19 Age : 52 Home City : Colne, Lancashire Model and year : LH119 4WD LSD Cruisin Cabin 1992 Registration date : 2018-08-07
Subject: Re: Rock and roll bed in a Cruising Cabin Tue Jul 21, 2020 3:40 pm
Get the seats re-upholstered with memory foam then they will be fine, I’ve done mine myself only because I’ve been a upholsterer in my younger days. Mine very comfy now. Also probably cheaper in the long run.
Djhatzigiannis likes this post
GPW Hiace Master
Number of posts : 1527 Home City : Cambridge, UK Model and year : Model: KD-KZH100G-MRPGT
Year: 1996
Colour: 4K1
Trim: FN42
Registration date : 2016-07-16
Subject: Re: Rock and roll bed in a Cruising Cabin Wed Jul 22, 2020 7:02 pm
I would also advise against changing the beds/seats, recover or buy a custom made foam mattress to unroll on top, with some cool foal etc to form the softer top part of the mattress.
Djhatzigiannis Not so new now
Number of posts : 21 Home City : Eltham Registration date : 2020-07-04
Subject: Re: Rock and roll bed in a Cruising Cabin Sun Jul 26, 2020 12:37 pm
If your in Melbourne let me know im about to trim mine up
Sponsored content
Subject: Re: Rock and roll bed in a Cruising Cabin