rear shockers

i am looking for a pair of rear shockers for my bus and am finding it hard to track them down.
they match a Tarago ie. pin at top and pin at bottom.
i am after heavy duty ones.
any leads accepted.
Thanks all
dave

Is that part # 48531-80574 ? (no tems).....fitted to a lot of euro spec vans?

yes thats the one

I used the KYB in my 1998 .
I used the ones that fit a Targao estima import .

do you have the part number please?

Yes I wouild like to know the answer to this as I have just bought the wrong ones!!! Would like a good brand. there is a crowd on Perth on ebay seem to be selling what I think are the right ones at $100 a pair. Very reasonable.
Anyone advise.

The part I used was KYB , 344225 .

These are for a Tarago Estima with IRS , They have the stem mount top and bottom .

They are slightly shorter then stock , but because my van was lowered a little they still work good.

Wouldn't think there was any difference between a 98 and a 2000 model? Mine lowered too so should be OK

Thanks for that. This may be of use to people?
http://webcat.zf.com/index.asp?SPR=4

thanks guys mine is not lowered but at least i have something to work with

There is this of course if you want to get some from your local dealer
http://www.toyodiy.com/parts/p_J_2000_TOYOTA_HIACE_KZH100G-JRPET_4804.html

yes there just standard not heavy duty been there got the tshirt and an empty wallet to boot

The pedders # 8053 8053 Comfort Gas Shock

Also worth note : EA Falcon Wagon shocks also might fit for lifted Vans or standard ?
They measure :
Size = 279mm Compressed - 493mm Extended
They also have another wagon size:
Size = 300mm Compressed - 480mm Extended

might be good for you to measure the standrds you have first to see how they compare ?

Also Pedders wagon shocks are: 9075 GSR9075 Gas Sports Ryder

thanks for that but the gas sports ryder is what i have on now and they lasted a whole 14 months bloody useless will try to get from japan rancho 9000s heavy duty

CHAMRA1 wrote:

The pedders # 8053 8053 Comfort Gas Shock

Also worth note : EA Falcon Wagon shocks also might fit for lifted Vans or standard ?
They measure :
Size = 279mm Compressed - 493mm Extended
They also have another wagon size:
Size = 300mm Compressed - 480mm Extended

might be good for you to measure the standrds you have first to see how they compare ?

Also Pedders wagon shocks are: 9075 GSR9075 Gas Sports Ryder

the falcon shocks may fit but do the springs fit as well cause there is no point lifting if the springs wont fit any more