Wheel Alignment

Someone on here put up he wheel alignment specs for a 1995 KZH106W 4x4.

I wonder if the same specs apply to my 1992 LH100 2 wheel drive?

Any help is appreciated. I called Toyota this week and they gave me a technical number to call on a premium rate number which I didn't find at all helpful. I don't feel I have to line Mr Toyotas pockets, but at the moment I cannot see an alternative.

These are the specs for the other bus...

_______________________________________________________________________________________
Thought I could start a list of specs. These are the factory specs as listed in my last wheel alignment data.
Van: 1995 Super Sustom 3.0TD 4WD Auto
Model: KZH106W

Factory Specified Range:

FRONT LEFT/RIGHT:
Camber -0°40' 0°50'
Caster 1°55' 3°25'
Toe -0°05' 0°05'
SAI 11°45' 13°15'
Included Angle 11°05' 14°05'

FRONT CROSS/TOTAL:
Cross Camber -0°30' 0°30'
Cross Caster -0°30' 0°30'
Cross SAI -0°30' 0°30'
Total Toe -0°10' 0°10'

REAR LEFT/RIGHT:
Camber -0°45' 0°45'
Toe -0°03' 0°03

REAR CROSS/TOTAL:
Total Toe -0°05' 0°05'


________________________________________________________________________________________

Simon

I am giving you the vales if its ok then no problem otherwise you have to inspect it and adjust the wheel .
Camber
Left−right error
1°00’ ± 45'

Caster
Left−right error
3°00’ ± 1°

Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and worn out parts and replace
them as necessary.





Our Website